Polyglot is a Middleware between the Universal Devices ISY Home Automation device and any number of external devices and services.
Polyglot v2 is built on the MEAN stack which is a production ready enterprise level code stack that includes:
Using these tools, along with the MQTT messaging protocol, we have created a robust IoT powerhouse that can speak to any and every device available with open API standards using simple, straight-forward modules (NodeServers).
While most of the previous code had been written in Python, the event loop driven Node.JS was chosen for this platform due to its asynchronous nature. Python or ANY language can still be used to develop a NodeServer with the standard API interface available.
The steps are outlined directly for the Raspberry Pi, specifically the 3 or 3b models which were used to test. This has also worked on the original Raspberry Pi (Armv6) as well. A pre-built script is here to do all the heavy lifting for you. This install procedure was tested using a clean install of Rasbian Stretch Lite. Version September 2017 at time of writing.
To Install Using the script (This will do EVERYTHING for you):
# Run the Install Script wget -qO - https://github.com/Einstein42/udi-polyglotv2/raw/master/scripts/install.sh | bash -e
You do NOT need to proceed with theses instructions if you ran the script above. This is all done for you.
The manual steps are listed here as well.
# Update your sources sudo apt-get update -qy # Install the MongoDB Server / git / Python3 / Curl sudo apt-get -qqy install mongodb-server git python3-pip python3-dev curl # Check MongoDB Status systemctl status mongodb ● mongodb.service - An object/document-oriented database Loaded: loaded (/lib/systemd/system/mongodb.service; enabled) Active: active (running) since Thu 2017-07-13 03:35:41 UTC; 25min ago Docs: man:mongod(1) Main PID: 431 (mongod) CGroup: /system.slice/mongodb.service └─431 /usr/bin/mongod --config /etc/mongodb.conf
Now the good stuff. Let's install Polyglot! Login as the user that is going to run Polyglot (pi or whatever you choose). Polyglot does NOT need to be run as root! (PLEASE DO NOT RUN POLYGLOT AS ROOT)
# Create a polyglot directory mkdir polyglot # Enter polyglot directory cd polyglot # Get the Polyglot binary. This example is for armv7 Raspberry Pi 3/3b. (armv6 is RPi 1/Nano and x64 is most x86 linux boxes) # If you don't know which one to get run the command 'lscpu' and look at the top line. 'Architecture' wget -q https://github.com/Einstein42/udi-polyglotv2/raw/master/binaries/polyglot-v2-linux-armv7.tar.gz # Extract the archive tar -zxf polyglot-v2-linux-armv7.tar.gz # Run Polyglot normally: ./polyglot-v2-linux-armv7 # OR # Run Polyglot with debug logging turned on: NODE_ENV=development ./polyglot-v2-linux-armv7
To start Polyglot on Boot do the following:
# Get base systemd script from the GitHub repository wget -q https://github.com/Einstein42/udi-polyglotv2/raw/master/scripts/polyglot-v2.service # Edit it for your system nano polyglot-v2.service # Modify the following sections in the polyglot-v2.service file # Replace <PWD> with the current directory that the polyglot binary resides in. # Replace <USER> with the user you want polyglot to run as # Replace <FILE> with the FULL path to the polyglot binary. e.g. /home/pi/polyglot/polyglot-v2-linux-armv7 # One the above changes are done to the polyglot-v2.service file, move it to the systemd unit folder sudo mv polyglot-v2.service /lib/systemd/system/ # Add the service then start polyglot-v2 sudo systemctl enable polyglot-v2 sudo systemctl start polyglot-v2
Verify that Polyglot is running
# Check Polyglot status sudo systemctl status polyglot-v2.service ● polyglot-v2.service - polyglot-v2 Loaded: loaded (/lib/systemd/system/polyglot-v2.service; enabled) Active: active (running) since Thu 2017-07-13 04:38:53 UTC; 10min ago Main PID: 1647 (node) CGroup: /system.slice/polyglot-v2.service └─1647 node /usr/local/bin/polyglot-v2 Jul 13 04:38:53 raspberrypi systemd: Started polyglot-v2.
Default username and password are both
Logs are located at
~/.polyglot/log/debug.log or you can use the frontend web interface to watch them in real-time.
# Watch the logs real-time tail -f ~/.polyglot/log/debug.log 7/13/2017, 4:24:15 AM - info: Starting Polyglot version 2.0 7/13/2017, 4:24:15 AM - info: MongoDB: Connected 7/13/2017, 4:24:16 AM - info: MQTT Services Started. 7/13/2017, 4:24:16 AM - info: Secure Server started on port 3000 7/13/2017, 4:24:16 AM - info: ISY: Got Version 5.0.10 7/13/2017, 4:24:16 AM - info: MQTT: Subscribe Successful udi/polyglot/connections/# QoS: 0 7/13/2017, 4:24:38 AM - info: Successful login by admin 7/13/2017, 4:24:39 AM - info: MQTT: Frontend Websockets interface Connected.
# Edit the ~/.polyglot/.env file nano ~/.polyglot/.env # Add or modify the NODE_ENV variable NODE_ENV=development
These configuration overrides are available in the ~/.polyglot/.env file. It is not required so you may have to create it. Most of them can be updated via the web interface and are all saved to the database, so these are typically not required unless you have a specific reason. These WILL override existing database settings, even if you change them and save in the frontend. Remember these are OVERRIDES.
# Overrides the IP address Polyglot listens on the local machine. HOST_IP='192.168.1.2' # Overrides the Port that Polyglot listens on for its frontend interface. HOST_PORT='3000' # Username used to login to the ISY. ISY_USERNAME='admin' # Password used to login to the ISY. Careful this is clear text, I wouldn't recommend setting this here. ISY_PASSWORD='password' # ISY IP address. This is automatically discovered on the initial run of Polyglot if you are on the same network. If you have multiple you can update it on the settings page of the frontend, or override it here. ISY_HOST='192.168.1.10' # ISY Port ISY_PORT='80' # ISY HTTPS: True/False This isn't fully tested so beware HTTPS at the moment. ISY_HTTPS='false' # MQTT Host is the IP address of the host running a MQTT server. This is built in to Polyglot so you won't need this unless you'd prefer an external MQTT server. MQTT_HOST='127.0.0.1' # MQTT Port is the port used to connect to the MQTT server. Default is 1883 MQTT_PORT='1883' # URI to access MongoDB. You might need this if you have an off-box Mongo instance. MONGO_URI='mongodb://localhost:27017/' # To enable debug logging set the NODE_ENV override to 'development' NODE_ENV='development' # To enable Custom SSL Certificates CUSTOM_SSL=true
If you want to use your own SSL certificates instead of the self-signed certificates that Polyglot auto generates for you, then place the certificates in the ~/.polyglot/ssl/custom/ folder. There should be three files present as outlined below. The custom.key file is read then encrypted in the database, the other two are simply read and stored since they are public certs. If the CUSTOM_SSL .env override is set to true, polyglot attempts to read the following files:
Polyglot will attempt to read these files on startup EVERY TIME that CUSTOM_SSL is enabled. If you allow Polyglot to read the files once, you can then delete the custom files and Polyglot will continue to use the saved values from the database. DO NOT DELETE THE ~/.polyglot/ssl/ client/polyglot certificates, these are used for MQTT encryption and authentication. Polyglot will spit them back out on startup even if you accidentally delete them.
First check the Wiki for how to build a NodeServer.
Prebuilt Python3 interface API for building NodeServers is here.
NodeJS interface API for building NodeServers is coming soon.